Trailer Led Wire Kit Easy To Install Plug And Play Wiring Lamp Boat Diy Flush Locks 500kg Per Spring - 1000kg

500kg Per Spring - 1000kg Per Pair

350NF (505 L

Stamped 4177-35

72MM FROM STUD TO STUD

Designed to apply the electric brakes on the trailer in the event of an accidental separation (breakaway) from the tow vehicle when coupled to a breakaway unit

Trailer Led Wire Kit Easy To Install Plug And Play Wiring Lamp Boat Diy Flush Locks 500kg Per Spring - 1000kgPLUG AND PLAY WIRING KIT TAIL LIGHTS 8x Super Bright LEDs with Enhanced Lens Optics ECEapproved IP67 100% Water proof 12V Only 150mm x 50mm x 23mm Water Submersible Fitting Instructions 1 Drill a 13mm hole for the wire outlet plug. 2 Remove the protective film from the 3M tape. 3 Push the cable and plug through the hole. 4 Line up the lamp and press firmly. 5 The lamp is held securely with high quality 3M tape. Wire Color for Trailer Kit Red Stop,